Surface preparation : Before painting, it is essential to prepare the surface properly. First, clean the surface of any dirt, grime, or loose paint using a pressure washer or by hand scrubbing with soap and water. Then scrape or sand any rough spots or peeling paint to ensure a smooth surface. Fill any cracks, gaps or holes with a suitable filler and allow it to dry. Finally, apply a coat of suitable exterior primer to create an even base for the paint.Application Step1) The opening paint should be used within 2 hours; 2) Maintain 7 days could be used; 3) Film protection: keep away from stepping on, rain, exposing to sunlight and scratching until the film is fully dried and solidified.

	Primer	Exterior Emulsion Top Coating
Property	Solvent free ( Water based )	Solvent free ( Water based )
Dry film thickness	50μm-80μm/layer	150μm-200μm/layer
Theoretical coverage	0.15 kg/㎡	0.30 kg/㎡
Touch dry	＜2h（25℃）	＜6h（25℃）
Drying time (hard)	24hours	24hours
Volume solids %	70	85
Application restrictions Min. Temp. Max. RH%	(-10) ~ (80)	(-10) ~ (80)
State in the container	After stirring, there is no caking, showing a uniform state	After stirring, there is no caking, showing a uniform state
Constructability	No difficulty in spraying	No difficulty in spraying
Nozzle orifice (mm)	1.5-2.0	1.5-2.0
Nozzle pressure（Mpa）	0.2-0.5	0.2-0.5
Water resistance（96h）	Normal	Normal
Acid resistance （48h）	Normal	Normal
Alkali resistance（48h）	Normal	Normal
Yellowing resistance (168h)	≤3.0	≤3.0
Wash resistance	2000 times	2000 times
Tarnish resistance /%	≤15	≤15
Mixing ratio for water	5%-10%	5%-10%
Service life	>10 years	>10 years
Storage time	1 year	1 year
Paint colors	Multi-color	Multi-color
Application way	Roller or Spray	Spray
Storage	5-30℃, cool, dry	5-30℃, cool, dry

Filler (optional)Pre-treated substratePrimerExterior Emulsion Paint Top Coating

Application

Suitable for commercial building, civil building, office, hotel, school, hospital , apartments, villa and other exterior walls surface decoration and the protection.

Package

20kg/barrel.

Storage

This product stored at above 0 ℃, well ventilation, shady and cool place.

Construction Conditions Choosing the right weather conditions is crucial when painting the exterior of your home. Ideally, you should avoid painting in extreme temperatures, including when it is too cold or hot, as it can affect the quality of the paint job. The best conditions for painting are dry and sunny days with moderate temperatures of around 15℃—25℃.Primer : Primer is critical for any paint job, as it provides a smooth, even surface for the topcoat, improves adhesion, and increases durability. Apply one coat of a good quality exterior primer and allow it to dry completely before applying the topcoat of exterior house washable emulsion paint.Clean tools and equipments first with paper towels, then clean the tools with solvent before the paint hardens.The above information is given to the best of our knowledge based on laboratory tests and practical experience. However, since we cannot anticipate or control many conditions under which our products may be used, we can only guarantee the quality of the product itself. We reserve the right to alter the given information without prior notice. Exterior emulsion paint top coating : Once the primer is dry, it is time to apply the topcoat of exterior house washable emulsion paint. Using a high-quality paintbrush or roller, apply the paint evenly, starting from the top and working your way down. Take care not to overload the brush or roller to avoid drips or runs. Apply the paint in thin coats, allowing each coat to dry before applying the next. Usually, two coats of exterior emulsion paint are enough, but further coats may be necessary for full coverage and color.Practical thickness of the paints can be little different from the theoretical thickness mentioned above due to many elements like environment,application methods,etc.