Surface preparation :The surface should be polished, repaired, dust collected according to the site basic surface condition; Correct substrate preparation is critical for optimum performance. Surface should be sound, clean, dry and free from loose particles, oil, grease, and other contaminants.Application Step1) The mixing paint should be used within 20 minutes; 2) Maintain 1 week, can be used when paint is solid absolutely; 3) Film protection: keep away from stepping on, rain, exposing to sunlight and scratching until the film is fully dried and solidified.
Property
Solvent free ( water based )
Dry film thickness
30mu/layer
Theoretical coverage
0.15kg/㎡/layer
Touch dry
＜30 minutes（25℃）
Service life
> 10 years
Ratio (paint: water)
10:1
Construction tempature
>8℃
Paint colors
Transparency or Multi-colors
Application way
Roller, spray or brush
Storage
5-25℃, cool, dry
Special wood filler ( if necessary )Pre-treated substratePrimerVarnish (optionally)Wood furniture paint top coating
Application Scope
Suitable for furniture, wooden door, wood floor and other wood surfaces decoration and protection.
Package
20kg/barrel.
Storage
This product stored at above 0 ℃, well ventilation, shady and cool place.
Construction ConditionsThe construction conditions should not be in moisture season with cold weather (temperature is ≥10℃ and humidity is ≤85%). The below application time refers to normal temperature in 25℃.Primer :1) Mix ( A )Primer, ( B ) curinge agent and ( C ) thinner in a barrel according to ratio by weight; 2) Fully mix and stir in 4-5 min until without equal bubbles, ensure paint be fully stirred;The main purpose of this primer is to reach the anti-water, and seal the substrate completely and avoid air-bubbles in the body coating; 3) The reference consumption is 0.15kg/m2. Rolling, brush or spray the primer evenly (as the attached picture show) by 1 time; 4) Wait after 24 hours, the next application step to coat the top coating; 5) After 24 hours, according to the site condition, polishing can be done, this is optionally; 6) Inspection: ensure the paint film is evenly with uniform color, without hollowing.Wood furniture paint top coating:1) Mix ( A ) top coating, ( B ) curing agent and ( C ) thinner in a barrel according to ratio by weight; 2) Fully mix and stir in 4-5 min until without equal bubbles, ensure paint be fully stirred; 3) The reference consumption is 0.25kg/m2. Rolling, brush or spray the primer evenly (as the attached picture show) by 1 time; 4) Inspection: ensure the paint film is evenly with uniform color, without hollowing.Practical thickness of the paints can be little different from the theoretical thickness mentioned above due to many elements like environment,application methods,etc.The above information is given to the best of our knowledge based on laboratory tests and practical experience. However, since we cannot anticipate or control many conditions under which our products may be used, we can only guarantee the quality of the product itself. We reserve the right to alter the given information without prior notice.
Application Step
1) The mixing paint should be used within 20 minutes; 2) Maintain 1 week, can be used when paint is solid absolutely; 3) Film protection: keep away from stepping on, rain, exposing to sunlight and scratching until the film is fully dried and solidified.
Special wood filler ( if necessary )
Pre-treated substrate
PrimerVarnish (optionally)
Wood furniture paint top coating
Construction Conditions The construction conditions should not be in moisture season with cold weather (temperature is ≥10℃ and humidity is ≤85%). The below application time refers to normal temperature in 25℃.Primer : 1) Mix ( A )Primer, ( B ) curinge agent and ( C ) thinner in a barrel according to ratio by weight; 2) Fully mix and stir in 4-5 min until without equal bubbles, ensure paint be fully stirred;The main purpose of this primer is to reach the anti-water, and seal the substrate completely and avoid air-bubbles in the body coating; 3) The reference consumption is 0.15kg/m2. Rolling, brush or spray the primer evenly (as the attached picture show) by 1 time; 4) Wait after 24 hours, the next application step to coat the top coating; 5) After 24 hours, according to the site condition, polishing can be done, this is optionally; 6) Inspection: ensure the paint film is evenly with uniform color, without hollowing.Wood furniture paint top coating: 1) Mix ( A ) top coating, ( B ) curing agent and ( C ) thinner in a barrel according to ratio by weight; 2) Fully mix and stir in 4-5 min until without equal bubbles, ensure paint be fully stirred; 3) The reference consumption is 0.25kg/m2. Rolling, brush or spray the primer evenly (as the attached picture show) by 1 time; 4) Inspection: ensure the paint film is evenly with uniform color, without hollowing.
Practical thickness of the paints can be little different from the theoretical thickness mentioned above due to many elements like environment,application methods,etc.
The above information is given to the best of our knowledge based on laboratory tests and practical experience. However, since we cannot anticipate or control many conditions under which our products may be used, we can only guarantee the quality of the product itself. We reserve the right to alter the given information without prior notice.
