Primer: 1) Mix ( A )Primer, ( B ) curinge agent and ( C ) thinner in a barrel according to ratio by weight; 2) Fully mix and stir in 4-5 min until without equal bubbles, ensure paint be fully stirred. The main purpose of this primer is to reach the anti-water, and seal the substrate completely and avoid air-bubbles in the body coating; 3) The reference consumption is 0.15kg/m2. Rolling, brush or spray the primer evenly (as the attached picture show) by 1 time; 4) Wait after 24 hours, the next application step to coat the enamel top coating; 5) After 24 hours, according to the site condition, polishing can be done, this is optionally; 6) Inspection: ensure the paint film is evenly with uniform color, without hollowing.Application Step

	Primer	Enamel Top Coating	Varnish（optional)
Property	Solvent	Solvent	Solvent
Dry film thickness	100μm-200μm/layer	150μm-250μm/layer	80μm-120μm/layer
Theoretical coverage	0.15 kg/㎡	0.20 kg/㎡	0.10 kg/㎡
Touch dry	＜2h（25℃）	＜8h（25℃）	＜2h（25℃）
Drying time (hard)	12hours	12hours	12hours
Volume solids %	80	85	80
Application restrictions Min. Temp. Max. RH%	(-10) ~ (80)	(-10) ~ (80)	(-10) ~ (80)
Flash point	28	38	32
State in the container	After stirring, there is no caking, showing a uniform state	After stirring, there is no caking, showing a uniform state	After stirring, there is no caking, showing a uniform state
Constructability	No difficulty in spraying	No difficulty in spraying	No difficulty in spraying
Nozzle orifice (mm)	1.5-2.0	1.5-2.0	1.5-2.0
Nozzle pressure（Mpa）	0.1-0.2	0.1-0.2	0.1-0.2
Water resistance（96h）	Normal	Normal	Normal
Acid resistance （48h）	Normal	Normal	Normal
Alkali resistance（48h）	Normal	Normal	Normal
Yellowing resistance (168h)	≤3.0	≤3.0	≤3.0
Wash resistance	2000 times	2000 times	2000 times
Tarnish resistance /%	≤15	≤15	≤20
Service life	>10 years	>10 years	>10 years
Storage time	1 year	1 year	1 year
Paint colors	Multi-color	Multi-color	Transparent
Application way	Roller,Brush or Spray	Roller,Brush or Spray	Roller,Brush or Spray
Storage	5-30℃, cool, dry	5-30℃, cool, dry	5-30℃, cool, dry

PrimerPre-treated substrateEnamel Top CoatingVarnish  (optional)

Application Scope

Suitable for indoor and outdoor metal surface protection, such as steel structure of pipeline, metal furniture,marine, construction industry, electrical industry, instrument industry etc.

Package

20kg /barrel and 6kg /barrel.

Storage

This product stored at above 0 ℃, well ventilation, shady and cool place.

Construction Conditions The surface should be polished, repaired, dust collected according to the site basic surface condition; Correct substrate preparation is critical for optimum performance. Surface should be sound, clean, dry and free from loose particles, oil, grease, and other contaminants. Enamel Top Coating: 1) Mix ( A ) enamel top coating, ( B ) curing agent and ( C ) thinner in a barrel according to ratio by weight; 2) Fully mix and stir in 4-5 min until without equal bubbles, ensure paint be fully stirred; 3) The reference consumption is 0.25kg/m2. Rolling, brush or spray the primer evenly (as the attached picture show) by 1 time; 4) Inspection: ensure the paint film is evenly with uniform color, without hollowing.1) The mixing paint should be used within 20 minutes; 2) Maintain 1 week, can be used when paint is solid absolutely; 3) Film protection: keep away from stepping on, rain, exposing to sunlight and scratching until the film is fully dried and solidified.